Ordinance on Industrial Safety and Health
Ministry of Labour Ordinance No. 32 of September 30, 1972
Latest Amendments:
Ministry of Health, Labour and Welfare Ordinance No. 47 of March 30, 2007
In Japanese
掲載日：2008.03.28
Part II Safety Standards
Chapter I Prevention of Dangers Due to a Machine
Section 7 Rolling Mill, etc.
Article 144 (Enclosure, etc., of a Rolling Mill for Rolling Paper, etc.)
- (1) The employer shall provide an enclosure, a guide roll, etc., for the parts of the rolling mill for passing through a paper, a cloth, a metal foil, etc., which are liable to cause dangers to workers.
Article 145 (Shuttle Guard of a Weaving Machine)
- (1) The employer shall provide a shuttle guard for a weaving machine equipped with a shuttle.
Article 146 (Cover, etc., on a Drawing Block of a Wiredrawing Machine, etc.)
- (1) The employer shall provide a cover, an enclosure, etc., for a drawing block of a wiredrawing machine or a cage of strand-twisting machine, which are liableto cause dangers to workers.
Article 147 (Prevention of Dangers Due to an Injection Molding Machine, etc.)
- (1) The employer shall, when it is likely to cause a part of a body of a worker caught in an injection molding machine, a molding machine or a stamping machine, etc., (excluding those machines prescribed by Section 4 of this Chapter), provide a door, starting device with two-hand control and other safety devices.
- (2) The door set forth in the preceding paragraph shall be of the construction that the machine does not operate unless the door is closed.
Article 148 (Prevention of Dangers Due to Fans)
- (1) The employer shall provide a net or an enclosure for fans of which blades are liable to cause dangers to workers.
このページの先頭へ