Industrial Safety and Health Law
Law No. 57 of June 8, 1972
Latest Amendments:
Law No. 25 of May 31, 2006
In Japanese
Appended Table 20 (Refer to Article 77)
- (1) Skill training courses for operations chiefs of woodworking machines and press machines
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the types, structure and functions of work-related machines and their safety devicesKnowledge of the maintenance and inspection of work-related machines and their safety devices |
- (1) A person must be a graduate of a university or technical college accredited under the School Education Law (hereinafter referred to as a “university, etc.”) who completed a mechanical engineering course and, after graduation, must have two years or more of experience in designing, manufacturing, inspecting or operating machines related to the relevant work.
- (2) A person must be a graduate of a high school or secondary school accredited under the School Education Law (hereinafter referred to as a “high school, etc.”) who completed a mechanical engineering course and, after graduation, must have five years or more of experience in designing, manufacturing, inspecting or operating machines related to the relevant work.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of work methods |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in operating machines related to the relevant work.
- (2) A person must be a graduate of a high school, etc. and, after graduation, must have three years or more of experience in operating machines related to the relevant work.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (2) Skill training course for operations chiefs of industrial dryers
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure and operation of industrial dryers and their accessory facilities |
- (1) A person must be a graduate of a university, etc. who completed an engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or operating industrial dryers.
- (2) A person must be a graduate of a high school, etc. who completed an engineering course and, after graduation, must have five years or more of experience in designing, manufacturing, inspecting or operating industrial dryers.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of the inspection, maintenance and emergency measures of industrial dryers and their accessory facilities |
| Knowledge of the management of drying operations by industrial dryers |
- (1) A person must be a graduate of a university, etc. who completed an engineering or chemistry course and, after graduation, must have three years or more of experience in operating industrial dryers.
- (2) A person must be a graduate of a high school, etc. who completed an engineering or chemistry course and, after graduation, must have five years or more of experience in operating industrial dryers.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item
|
- (3) Skill training course for operations chiefs of concrete blasting
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of explosives, etc.
Knowledge of the operation of concrete breakers |
- (1) A person must be a graduate of a university, etc. who completed an industrial chemistry, mining or civil engineering course and, after graduation, must have one year or more of experience in handling explosives.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
Knowledge of blasting methods using concrete breakers
Knowledge to educate workers |
- (1) A person must be a graduate of a university, etc. who completed an industrial chemistry, mining or civil engineering course and, after graduation, must have two years or more of experience in blasting using concrete breakers.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (4) Skill training courses for operations chiefs of excavating natural ground and shoring; skill training course for operations chiefs of tunnel excavation, etc.; skill training course for operations chiefs of tunnel lining; skill training course for operations chiefs of concrete form shoring work; skill training course for operations chiefs of scaffolding erection; skill training course for operations chiefs of erection, etc. of steel structures; skill training course for operations chiefs of construction, etc. of steel bridges; skill training course for operations chiefs of demolition, etc. of concrete structures; and skill training course for operations chiefs of construction, etc. of concrete bridges
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of work methods |
- (1) A person must be a graduate of a university, etc. who completed a civil engineering, architecture or mining course (an architecture course shall be excluded for the skill training courses for operations chiefs of tunnel excavation, etc. and tunnel lining, and a shipbuilding course shall be included for the skill training course for operations chiefs of scaffolding erection; hereinafter referred to as “specified courses” in this table); and, after graduation, must have three years or more of experience in construction work (construction work for the skill training courses for operations chiefs of tunnel excavation, etc. and tunnel lining shall be limited to tunnel construction; that for the skill training course for operations chiefs of scaffolding erection shall include shipbuilding; and that for the skill training course for operations chiefs of demolition, etc. of concrete structures shall be limited to demolition, etc. of concrete structures; hereinafter referred to as “specified work” in this table).
- (2) A person must be a graduate of a high school, etc. who completed a specified course and, after graduation, must have five years or more of experience in specified work.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of construction facilities, machines, tools and work environmentKnowledge to educate workers |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have three years or more of experience in specified work or safety guidance related to specified work.
- (2) A person must be a graduate of a high school, etc. and, after graduation, must have five years or more of experience in specified work or safety guidance related to specified work.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have three years or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (5) Skill training course for operations chiefs of excavating work for quarrying
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the types of rocks and excavating methods for rock quarrying |
- (1) A person must be a graduate of a university, etc. who completed a mining or civil engineering course and, after gradation, must have three years or more of experience in quarrying work.
- (2) A person must be a graduate of a high school, etc. who completed a mining or civil engineering course and, after graduation, must have five years or more of experience in quarrying work.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of facilities, machines, tools and work environmentKnowledge to educate workers |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have three years or more of experience in quarrying work or safety guidance related to quarrying work.
- (2) A person must be a graduate of a high school, etc. and, after graduation, must have five years or more of experience in quarrying work or safety guidance related to quarrying work.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have three years or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (6) Skill training course for operations chiefs of cargo stacking
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of stacking cargo (a collection of cargo piled up in a warehouse, shed or cargo depot; hereinafter the same)Knowledge of manual work of making or breaking stacks of cargo |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have three years or more of experience in making or breaking stacks of cargo.
- (2) A person must be a graduate of a high school, etc. and, after graduation, must have five years or more of experience in making or breaking stacks of cargo.
- (3) A person must have completed the skill training course for operations chiefs of stacking cargo and, after completion, must have three years or more of experience in making or breaking stacks of cargo.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
| Knowledge of mechanical cargo handling for making and breaking stacks of cargo |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in making or breaking stacks of cargo.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have five years or more of experience in making or breaking stacks of cargo.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (7) Skill training course for operations chiefs of stevedoring
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge necessary for work direction and supervision |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have three years or more of experience in safety management service related to stevedoring.
- (2) A person must be a graduate of a high school, etc. and, after graduation, must have five years or more of experience in safety management service related to stevedoring.
- (3) A person must have ten years or more of experience in safety management service related to stevedoring.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
| Knowledge of the structure and operating methods of ship facilities and cargo handling machines |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in stevedoring.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have five years or more of experience in stevedoring.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of slinging work and the giving of signals |
- (1) A person must be a graduate of a university, etc. who completed a dynamics course and, after graduation, must have two years or more of experience in slinging work.
- (2) A person must be a graduate of a high school, etc. who completed a dynamics course and, after graduation, must have four years or more of experience in slinging work.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of cargo handling methods |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have three years or more of experience in stevedoring.
- (2) A person must be a graduate of a high school, etc. and, after graduation, must have five years or more of experience in stevedoring.
- (3) A person must have five years or more of experience in supervising or directing stevedores.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (8) Skill training course for operations chiefs of the erection, etc. of wooden
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of work for wooden buildings such as building construction members and mounting roof backings |
- (1) A person must be a graduate of a university, etc. who completed an architecture course and, after graduation, must have three years or more of experience in the erection, etc. of wooden buildings.
- (2) A person must be a graduate of a high school, etc. who completed an architecture course and, after graduation, must have five years or more of experience in the erection, etc. of wooden buildings.
- (3) A person must have ten years or more of experience in the erection, etc. of wooden buildings and, during that period, must have three years or more of experience in serving as a foreman for the relevant work or otherwise holding a position that directly instructs or supervises workers engaged in the relevant work.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
| Knowledge of construction facilities, machines, tools and work environmentKnowledge to educate workers |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have three years or more of experience in the erection, etc. of wooden buildings or safety guidance related to the relevant work.
- (2) A person must be a graduate of a high school, etc. and, after graduation, must have five years or more of experience in the erection, etc. of wooden buildings or safety guidance related to the relevant work.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have three years or more of experience in safety service.
- (2) A person must be a graduate of a high school, etc. and, after graduation, must have five years or more of experience in safety service.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
- (9) Skill training course for operations chiefs of the work for handling Class-1 pressure vessels related to chemical facilities
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure of Class-1 pressure vessels |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering or chemical engineering course and, after graduation, must have five years or more of experience in designing, manufacturing, inspecting or handling boilers or Class-1 pressure vessels.
- (2) A person must have eight years or more of experience in designing, manufacturing or inspecting boilers or Class-1 pressure vessels.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of the handling of Class-1 pressure vessels |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering or chemical engineering course and, after graduation, must have five years or more of experience in handling Class-1 pressure vessels related to chemical facilities.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Knowledge of hazardous materials and chemical reactions |
- (1) A person must be a graduate of a university, etc. who completed an industrial chemistry course and, after graduation, must have six years or more of experience in work related to hazardous materials.
- (2) A person must be a graduate of a high school, etc. who completed an industrial chemistry course and, after graduation, must have eight years or more of experience in work related to hazardous materials.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in managing Class-1 pressure vessels related to chemical facilities.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (10) Skill training course for operations chiefs of the work for handling ordinary Class-1 pressure vessels
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure of Class-1 pressure vessels (except for those related to chemical facilities) |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have two years or more of experience in designing, manufacturing, inspecting or handling boilers or Class-1 pressure vessels.
- (2) A person must have five years or more of experience in designing, manufacturing or inspecting boilers or Class-1 pressure vessels.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of the handling of Class-1 pressure vessels (except for those related to chemical facilities) |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have two years or more of experience in handling Class-1 pressure vessels.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in managing boilers or Class-1 pressure vessels.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (11) Skill training courses for operations chiefs of the work for handling specified chemical substances and tetra-alkyl lead, etc.; that for operations chiefs of the work for handling lead; that for operations chiefs of the work for handling organic solvents; and that for operations chiefs of the work for handling asbestos
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of health hazards and their preventive measures |
- (1) A person must be a graduate of a university accredited under the School Education Law who completed a medical course and, after graduation, must have two years or more of experience in research or work related to industrial health.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Knowledge of work environment improvement methods |
- (1) A person must be a graduate of a university, etc. who completed an engineering course and, after graduation, must have two years or more of experience in engineering research or practical work related to industrial health.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Knowledge of protective equipment |
- (1) A person must be a graduate of a university, etc. who completed an engineering course and, after graduation, must have two years or more of experience in research or practical work related to protective equipment.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in industrial health service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (12) Skill training course for operations chiefs of hazardous work in oxygen-deficient air.
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of anoxia and emergency resuscitation |
- (1) A person must be a graduate of a university accredited under the School Education Law who completed a medical course and, after graduation, must have two years or more of experience in research or practical work related to industrial health.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Knowledge of causes of occurrence of oxygen deficiency and preventive measures |
- (1) A person must be a graduate of a university, etc. who completed a science or engineering course and, after graduation, must have two years or more of experience in engineering research or practical work related to industrial health.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Knowledge of protective equipment |
- (1) A person must be a graduate of a university accredited under the School Education Law who completed a medical course or a graduate of a university, etc. who completed an engineering course and, after graduation, must have two years or more of experience in research or practical work related to protective equipment.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in industrial health service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Emergency resuscitation methods |
- (1) A person must be a graduate of a university accredited under the School Education Law who completed a medical course and, after graduation, must have two years or more of experience in research or practical work related to industrial health.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Oxygen concentration measurement methods |
- (1) A person must be a graduate of a university, etc. who completed a science or engineering course and, after graduation, must have one year or more of experience in practical work related to environmental measurement.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (13) Skill training course for operations chiefs of hazardous work in oxygen-deficient air or involving hydrogen sulfide.
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of anoxia, hydrogen sulfide poisoning and emergency resuscitation |
- (1) A person must be a graduate of a university accredited under the School Education Law who completed a medical course and, after graduation, must have two years or more of experience in research or practical work related to industrial health.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Knowledge of causes of occurrence of oxygen deficiency and hydrogen sulfide, and preventive measures |
- (1) A person must be a graduate of a university, etc. who completed a science or engineering course and, after graduation, must have two years or more of experience in engineering research or practical work relating to industrial health.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Knowledge of protective equipment |
- (1) A person must be a graduate of a university accredited under the School Education Law who completed a medical course or a graduate of a university, etc. who completed an engineering course and, after graduation, must have two years or more of experience in research or practical work relating to protective equipment.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in industrial health service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Emergency resuscitation methods |
- (1) A person must be a graduate of a university accredited under the School Education Law who completed a medical course and, after graduation, must have two years or more of experience in research or practical work related to industrial health.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Oxygen and hydrogen sulfide concentration measurement methods |
- (1) A person must be a graduate of a university, etc. who completed a science or engineering course and, after graduation, must have one year or more of experience in practical work related to environmental measurements.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
- (14) Skill training course for the operation of floor-operated cranes
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of floor-operated cranes |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining cranes.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of motors and electricity |
- (1) A person must be a graduate of a university, etc. who completed an electrical engineering or mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed an electrical engineering or mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining cranes.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of dynamics necessary for the operation of floor-operated cranes |
- (1) A person must be a graduate of a university, etc. who completed a dynamics course.
- (2) A person must be a graduate of a high school, etc. who completed a dynamics course and, after graduation, must have three years or more of experience in operating cranes.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Operation of floor-operated cranes
Giving signals for the operation of floor-operated cranes |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have one year or more of experience in operating floor-operated cranes.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in operating floor-operated cranes.
- (3) A person must have completed the skill training course for the operation of floor-operated cranes and, after completion, must have five years or more of experience in operating floor-operated cranes.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
- (15) Skill training course for the operation of light duty mobile cranes
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of light duty mobile cranes |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining mobile cranes.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of motors and electricity |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining mobile cranes.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of dynamics necessary for the operation of light duty mobile cranes |
- (1) A person must be a graduate of a university, etc. who completed a dynamics course.
- (2) A person must be a graduate of a high school, etc. who completed a dynamics course and, after graduation, must have three years or more of experience in operating mobile cranes.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Operation of light duty mobile cranes |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have one year or more of experience in operating mobile cranes.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in operating mobile cranes.
- (3) A person must have completed the skill training course for the operation of light duty mobile cranes and, after completion, must have five years or more of experience in operating light duty mobile cranes.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
| Giving signals for the operation of light duty mobile cranes |
- (16) Skill training course on gas welding
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure and operating methods of equipment used for gas welding |
- (1) A person must be a graduate of a university, etc. who completed an engineering course.
- (2) A person must be a graduate of a high school, etc. who completed an engineering course and, after graduation, must have three years or more of experience in gas welding.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of inflammable gases and oxygen used for gas welding |
- (1) A person must be a graduate of a university, etc. who completed a chemistry course.
- (2) A person must be a graduate of a high school, etc. who completed a chemistry course and, after graduation, must have three years or more of experience in gas welding.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
|
| Practical training |
Handling of equipment used for gas welding |
- (1) A person must be a graduate of a university, etc. who completed an engineering course and, after graduation, must have one year or more of experience in gas welding.
- (2) A person must be a graduate of a high school, etc. who completed an engineering course and, after graduation, must have three years or more of experience in gas welding.
- (3) A person must have completed the skill training course on gas welding and must have five years or more of experience in gas welding.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
- (17) Skill training courses for the operation of forklifts and shovel loaders, etc.
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure and operating methods of driving systems |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining automotive vehicles.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of the structure and operating methods of cargo handling devices |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining forklifts or shovel loaders, etc.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of dynamics necessary for the operation of related devices |
- (1) A person must be a graduate of a university, etc. who completed a dynamics course.
- (2) A person must be a graduate of a high school, etc. who completed a dynamics course and, after graduation, must have three years or more of experience in operating forklifts or shovel loaders, etc.
- 3. A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Driving operation
Cargo handling operation |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have one year or more of experience in operating forklifts or shovel loaders, etc.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in operating forklifts or shovel loaders, etc.
- (3) A person must have completed the skill training courses for the operation of forklifts or shovel loaders, etc. and, after completion, must have five years or more of experience in operating forklifts or shovel loaders, etc.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
- (18) Skill training course for the operation of vehicle-type construction machines for leveling ground, transport, loading and excavating, and skill training course for the operation of vehicle-type construction machines for demolition.
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure and operating methods of driving systems |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining automotive vehicles.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of the structure and operation of work-related devices, and work methods |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining vehicle-type construction machines for ground leveling, transport, loading and excavating, or for demolition.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of general matters necessary for the operation of machines |
- (1) A person must be a graduate of a university, etc. who completed a civil engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a civil engineering course and, after graduation, must have three years or more of experience in operating vehicle-type construction machines for ground leveling, transport, loading and excavating, or for demolition.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Driving operation
Operation of devices for work |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have one year or more of experience in operating vehicle-type construction machines for ground leveling, transport, loading and excavating, or for demolition.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in operating vehicle-type construction machines for ground leveling, transport, loading and excavating, or for demolition.
- (3) A person must have completed the skill training course for the operation of vehicle-type construction machines for ground leveling, transport, loading and excavating, or those for demolition and, after completion, must have five years or more of experience in operating vehicle-type construction machines for ground leveling, transport, loading and excavating, or for demolition.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
- (19) Skill training course for the operation of vehicle-type construction machines for foundation work
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure and operating methods of driving systems |
(1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.(2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining automotive vehicles.(3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items. |
| Knowledge of the structure and operation of work-related devices, and work methods |
(1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.(2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining vehicle-type construction machines for foundation work.(3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items. |
| Knowledge of general matters necessary for the operation of machines |
- (1) A person must be a graduate of a university, etc. who completed a civil engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a civil engineering course and, after graduation, must have three years or more of experience in operating vehicle-type construction machines for foundation work.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Driving operation
Operation of devices for work and giving signals |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have one year or more of experience in operating vehicle-type construction machines for foundation work.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in operating vehicle-type construction machines for foundation work.
- (3) A person must have completed the skill training course for the operation of vehicle-type construction machines for foundation work and, after completion, must have five years or more of experience in operating vehicle-type construction machines for foundation work.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
- (20) Skill training course for the operation of rough terrain vehicles
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure and operating methods of driving systems |
- (1) A person must be a graduate from a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate from a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining automotive vehicles.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of the transportation of loads |
- (1) A person must be a graduate of a university, etc. who completed a dynamics course.
- (2) A person must be a graduate of a high school, etc. who completed a dynamics course and, after graduation, must have three years or more of experience in operating rough terrain vehicles.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of dynamics necessary for the operation of vehicles |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining automotive vehicles.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Driving operation
Load transportation |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have one year or more of experience in operating rough terrain vehicles.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in operating rough terrain vehicles.
- (3) A person must have completed the skill training course for the operation of rough terrain vehicles and, after completion, must have five years or more of experience in operating rough terrain vehicles.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
- (21) Skill training course for the operation of vehicle for work at height
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure and operating methods of work-related devices |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining vehicle-mounted aerial platforms.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of motors |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or maintaining automotive vehicles.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of general matters necessary for the operation of vehicles |
- (1) A person must be a graduate of a university, etc. who completed dynamics and electricity courses.
- (2) A person must be a graduate of a high school, etc. who completed a dynamics course and, after graduation, must have three years or more of experience in operating vehicle-mounted aerial platforms.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Operation of devices for work |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have one year or more of experience in operating vehicle-mounted aerial platforms.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in operating vehicle-mounted aerial platforms.
- (3) A person must have completed the skill training course for the operation of vehicle-mounted aerial platforms and, after completion, must have five years or more of experience in operating vehicle-mounted aerial platforms.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
- (22) Skill training course for sling work
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of cranes, mobile cranes, derricks and cargo hoisting equipment (hereinafter referred to as “cranes, etc.”) |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course.
- (2) A person must be a graduate of a high school, etc. who completed a mechanical engineering course and, after graduation, must have five years or more of experience in designing, manufacturing or inspecting cranes, etc.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Knowledge of dynamics necessary for sling work using cranes, etc. |
- (1) A person must be a graduate of a university, etc. who completed a dynamics course.
- (2) A person must be a graduate of a high school, etc. who completed a dynamics course and, after graduation, must have three years or more of experience in sling work using cranes, etc.
- (3) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding two items.
|
| Sling methods using cranes, etc. |
- (1) A person must be a graduate of a university, etc. who completed a dynamics course and, after graduation, must have two years or more of experience in sling work using cranes, etc.
- (2) A person must be a graduate of a high school, etc. who completed a dynamics course and, after graduation, must have five years or more of experience in sling work using cranes, etc.
- (3) A person must have completed the skill training course for sling work and must have ten years or more of experience in sling work using cranes, etc.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
| Applicable laws and ordinances |
- (1) A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Practical training |
Sling work using cranes, etc.
Giving signals for the operation of cranes, etc. |
- (1) A person must be a graduate of a university, etc. who completed a dynamics course and, after graduation, must have two years or more of experience in sling work using cranes, etc.
- (2) A person must be a graduate of a high school, etc. who completed a dynamics course and, after graduation, must have five years or more of experience in sling work using cranes, etc.
- (3) A person must have completed the skill training course for sling work and must have ten years or more of experience in sling work using cranes, etc.
- (4) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding three items.
|
- (23) Skill training course for the operation of boilers
| Training subject |
Qualifications |
| Theoretical instruction |
Knowledge of the structure of boilers
Knowledge of the operation of boilers
Knowledge of ignition and combustion
Knowledge of inspection and emergency measures |
- (1) A person must be a graduate of a university, etc. who completed a mechanical engineering course and, after graduation, must have three years or more of experience in designing, manufacturing, inspecting or operating boilers.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
| Applicable laws and ordinances |
- (1)A person must be a graduate of a university, etc. and, after graduation, must have one year or more of experience in safety service.
- (2) A person must have knowledge and experience equivalent to or greater than that of persons specified in the preceding item.
|
|
このページの先頭へ